Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
13.1. A technical characteristics
13.2. Care of a body
13.3. Repair of insignificant damages of a body
13.4. Repair of strong damages of a body
+ 13.5. A cowl
13.6. Removal and installation of forward furnish of the car
13.7. Removal and installation of back furnish of the car
13.8. Removal and installation of a forward wing
13.9. Removal and installation обтекателя a windscreen
+ 13.10. Doors
13.11. Removal and installation of a cover of a luggage carrier and торсионов
13.12. Replacement of components of the lock of a cover of a luggage carrier
13.13. A windscreen
13.14. Removal and installation of back slightly opened glass
13.15. Replacement of consolidation of back slightly opened glass
13.16. Replacement of an external rear-view mirror
+ 13.17. Seats
13.18. Removal and installation of headrests
13.19. Removal of furnish of a luggage space
13.20. Removal and installation of the central console
13.21. Removal and installation of a ware box
13.22. Replacement of seat belts
13.23. Check and hatch service
+ 13.24. The electric equipment of a body
+ 14. Electric schemes
|
THE LOCK OF THE COVER OF THE LUGGAGE CARRIER
PERFORMANCE ORDER |
1. Spend a line on lock perimetre on a luggage carrier cover. |
|
2. Unscrew screws and remove the lock of a cover of a luggage carrier. |
3. Installation is made in sequence, return to removal. |
4. The lock establish according to a line put before removal. |
5. Check up lock work, opening and closing a luggage carrier some times. |
6. If necessary adjust lock or latch position. |
|
LATCH OF THE LOCK OF THE COVER OF THE LUGGAGE CARRIER
PERFORMANCE ORDER |
1. Remove protective furnish from a ledge of a cover of a luggage carrier. |
|
2. Unscrew a bolt (1), disconnect plugs (2) latches (3) and remove it. |
3. Installation is made in sequence, return to removal. |
4. For adjustment ослабьте a bolt and, moving a latch, establish it on the demanded height. |
|
THE HANDLE OF THE COVER OF THE LUGGAGE CARRIER
PERFORMANCE ORDER |
|
1. Open a cover of a luggage carrier and unscrew two nuts, fastening the handle of a cover of a luggage carrier which are accessible from the inside. |
2. Installation is made in sequence, return to removal. |
|
|
|