Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   - 13.24. The electric equipment of a body
      13.24.1. A technical characteristics
      13.24.2. Electric chains
      + 13.24.3. Detection of not closed chain
      13.24.4. Fuses and the relay
      13.24.5. Replacement of switches
      13.24.6. Removal and installation of sound signals
      13.24.7. Removal and installation of hours
      13.24.8. Removal and installation прикуривателя
      - 13.24.9. A combination of devices
         13.24.9.1. Removal and installation of a combination of devices
         13.24.9.2. Repair of a combination of devices
      13.24.10. Removal and installation of a cable of a drive of a speedometer
      13.24.11. Replacement of bulbs
      13.24.12. Removal and installation of the block of a headlight / of the index of turns
      13.24.13. Adjustment of light of headlights
      + 13.24.14. The onboard computer
      + 13.24.15. System of the central blocking
      13.24.16. Seats with heating
      13.24.17. Removal and installation of contact plates and probes of a back door
      13.24.18. Removal and installation of levers and brushes of screen wipers
      13.24.19. Removal and installation of the engine of a screen wiper and draught
      13.24.20. Removal and installation of the engine of a back screen wiper
      13.24.21. Washers of wind and back glass
      13.24.22. Removal and installation of a radio receiver from a player of cartridges
      13.24.23. Removal and installation of loudspeakers
+ 14. Electric schemes


944881c0

13.24.9. A combination of devices

13.24.9.1. Removal and installation of a combination of devices

Removal

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Remove the button of a sound signal from a steering wheel and unscrew a steering wheel.
3. Unscrew four screws and remove the top casing of a steering column.
4. Remove decorative заглушки and unscrew four screws, fastening a casing of a combination of devices. Two screws are located above and on one screw in corners of the basis of a casing of a combination of devices.
5. Remove a casing of a combination of devices and disconnect electric sockets from switches.
6. Press a clamp and disconnect a cable of a drive of a speedometer from a combination of devices.
7. Unscrew the screw.
8. Remove a combination of devices.
9. Disconnect electric sockets, and at presence экономайзера – as well a vacuum hose from a combination of devices.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. On models with a liquid crystal combination of devices check up that the switch of a code of a speedometer is established in correct position (1).
3. On models with tyres 175/70 R13 or 185/60 R14 establish the switch in position 1, and on models with tyres of other sizes establish the switch in position 2 (marks are put on the switch).