Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   - 3.1. Maintenance service of cars with petrol engines
      3.1.1. Operational materials and liquids
      3.1.2. Refuelling capacities
      - 3.1.3. Periodicity of service
         + 3.1.3.1. Each 15 000 km
         + 3.1.3.2. Each 30 000 km
         + 3.1.3.3. Each two years
         - 3.1.3.4. Each 60 000 km
            3.1.3.4.1. Replacement трансмиссионной liquids in an automatic transmission
   + 3.2. Maintenance service of cars with diesel engines
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

3.1.3.4. Each 60 000 km

3.1.3.4.1. Replacement трансмиссионной liquids in an automatic transmission

THE GENERAL DATA

Before сливом трансмиссионной liquids allow a transmission to cool down.

PERFORMANCE ORDER

1. Unscrew all screws of fastening of the pallet of a transmission except for the screw which should be unscrewed through some turns.

2. Separate the pallet from a lining and as the pallet end is inclined downwards, merge a liquid in the suitable container.

3. Unscrew the remained screw and remove the pallet. Remove a lining of the pallet or remove all traces of hermetic.

4. Release fixing скобы and remove the filter with a sealing ring. Wash out the filter in solvent and dry up it. If the filter is hammered or damaged, replace it.

5. Establish the filter with a new sealing ring of round section.

6. Check up that interfaced surfaces of the pallet and картера transmissions pure and dry. Establish the pallet with a new lining or with the layer of hermetic in diameter of 5 mm put on the interfaced surface of the oil pallet. The pallet which should be established with a lining, has intensifying edges, and the pallet established on hermetic, has obvious ledges.

7. Fill in in a transmission demanded quantity трансмиссионной liquids and check up level.