Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
- 7. Start and gymnastics system
7.1. A technical characteristics
7.2. A finding of malfunctions in electric chains
+ 7.3. The accumulator
+ 7.4. The generator
+ 7.5. A starter
7.6. Replacement of the lock of ignition
7.7. Removal and installation of the gauge of pressure of oil
7.8. Removal and installation of the gauge of level of oil on models with 16th valves
+ 7.9. The electric equipment of diesel engines 16D, 16DA, 17D and 17DR
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
The gauge of pressure of oil is screwed in in the block of cylinders or a fixing element of the oil filter.
Removal
| PERFORMANCE ORDER |
|
|
1. Remove a wire of weight from the accumulator and disconnect wires (are specified by arrows) from the gauge. |
| 2. Unscrew the gauge and remove a sealing ring. If the gauge acts in film for long time, close a suitable stopper an aperture for the gauge. |
|
Installation
| PERFORMANCE ORDER |
| 1. Check up a condition of a sealing ring and, if necessary, replace it. |
| 2. Screw in the gauge together with a sealing ring and tighten its demanded moment. Connect to the gauge electric wires. |
| 3. Check up level of engine oil and, if necessary, finish it to norm. |
|
|
|
