Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
   + 10.1. A mechanical transmission
   - 10.2. An automatic transmission
      10.2.1. A technical characteristics
      10.2.2. Removal, installation and adjustment of a cable of the device kick-down
      10.2.3. Removal, installation and adjustment of a cable of a choice of transfers
      10.2.4. Replacement of the switch of blocking of a starter and backing lanterns
      + 10.2.5. A transmission
   + 10.3. Power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

10.2. An automatic transmission

THE GENERAL DATA

On cars the automatic transmission of General Motors is established. The transmission provides inclusion of three transfers of a forward course, transfer of a backing and compulsory inclusion of a hill-climbing gear. The differential and the main transfer are located in картере transmissions.

The twisting moment from the engine to a transmission is transferred through the hydrotransformer which carries out function of liquid coupling and operates as automatic coupling, and also provides twisting moment transfer at acceleration. Twisting moment transfer between transmission gear wheels is carried out by chain transfer and a hydraulic drive which operates gear wheels, couplings and brakes, depending on speed and loading. Because the transmission works in enough severe conditions, absolute cleanliness is necessary for normal work of a transmission. It is necessary for considering at addition трансмиссионной a liquid or removal of any detail from a transmission. Hit in a transmission of sand or a dirt will put out of action the valve and will break transmission work.

The automatic transmission represents the difficult unit, therefore in house conditions it is possible to execute only the operations resulted in given subsection.