Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
   + 10.1. A mechanical transmission
   - 10.2. An automatic transmission
      10.2.1. A technical characteristics
      10.2.2. Removal, installation and adjustment of a cable of the device kick-down
      10.2.3. Removal, installation and adjustment of a cable of a choice of transfers
      10.2.4. Replacement of the switch of blocking of a starter and backing lanterns
      + 10.2.5. A transmission
   + 10.3. Power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes


944881c0

10.2.2. Removal, installation and adjustment of a cable of the device kick-down
THE GENERAL DATA

Elements of fastening of a cable of compulsory inclusion of a hill-climbing gear (kick-down) on the carburettor

And – fastening of a cover of a cable,

In – the spherical hinge of a cable

Removal and installation

PERFORMANCE ORDER
1. Remove the air filter.
2. Disconnect a cable of compulsory inclusion of a hill-climbing gear from the carburettor for what take скобу, крепящую a cable cover to an arm and using the lever, remove a cable from the spherical hinge of the lever of the carburettor.
3. From outside transmissions unscrew tightening a bolt from the plug of a cover of a cable, move the plug upwards and disconnect a cable.
4. Take the mechanism of adjustment of a tension of a cable from an arm for what press blocking ledges.
5. Installation is made in sequence, return to removal.
6. Then adjust a cable.

Adjustment

PERFORMANCE ORDER
1. Check up that the accelerator cable has insignificant sagging at the released pedal of an accelerator.
2. If necessary adjust a cable, rotating the persistent screw of a pedal of an accelerator.
3. Ask the assistant to press slowly a pedal of an accelerator to a contact of its mechanism of compulsory inclusion of a hill-climbing gear. In this position throttle заслонка the carburettor it should be completely open.
4. If necessary adjust the cable end on the carburettor.
5. Ask the assistant to press an accelerator pedal against the stop. In the presence of correct adjustment, the ratchet of the self-regulated mechanism should publish clicks.
6. The further adjustment of a cable is not required.
7. Release a pedal of an accelerator and establish the air filter.