Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
   + 10.1. A mechanical transmission
   - 10.2. An automatic transmission
      10.2.1. A technical characteristics
      10.2.2. Removal, installation and adjustment of a cable of the device kick-down
      10.2.3. Removal, installation and adjustment of a cable of a choice of transfers
      10.2.4. Replacement of the switch of blocking of a starter and backing lanterns
      + 10.2.5. A transmission
   + 10.3. Power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

10.2.4. Replacement of the switch of blocking of a starter and backing lanterns
Removal

PERFORMANCE ORDER

1. Remove a wire of weight from the accumulator.

2. Remove decorative furnish of the lever of the selector.

3. Unscrew two screws, fastening the switch.

4. Disconnect a green wire with a white strip from a cartridge of a lamp of illumination of the panel of the selector.

5. Remove an external cover of a plait of wires approximately on 10 sm, then cut a plait of wires.

6. Similarly arrive with a plait of wires of the new switch.

7. Remove the switch.

Installation

PERFORMANCE ORDER

1. Establish the new switch and connect wires according to colour of isolation of a wire.

2. Isolate connection of wires.

3. Temporarily connect a wire of weight of the accumulator.

4. Include ignition and check up that backing lanterns join only in position of the lever of selector R, and engine start is possible only in position Р and N.

5. Remove a wire of weight from the accumulator, then establish decorative furnish of the lever of the selector and connect a weight wire to the accumulator.