Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   - 13.24. The electric equipment of a body
      13.24.1. A technical characteristics
      13.24.2. Electric chains
      + 13.24.3. Detection of not closed chain
      13.24.4. Fuses and the relay
      13.24.5. Replacement of switches
      13.24.6. Removal and installation of sound signals
      13.24.7. Removal and installation of hours
      13.24.8. Removal and installation прикуривателя
      + 13.24.9. A combination of devices
      13.24.10. Removal and installation of a cable of a drive of a speedometer
      13.24.11. Replacement of bulbs
      13.24.12. Removal and installation of the block of a headlight / of the index of turns
      13.24.13. Adjustment of light of headlights
      + 13.24.14. The onboard computer
      - 13.24.15. System of the central blocking
         13.24.15.1. Replacement of making components
      13.24.16. Seats with heating
      13.24.17. Removal and installation of contact plates and probes of a back door
      13.24.18. Removal and installation of levers and brushes of screen wipers
      13.24.19. Removal and installation of the engine of a screen wiper and draught
      13.24.20. Removal and installation of the engine of a back screen wiper
      13.24.21. Washers of wind and back glass
      13.24.22. Removal and installation of a radio receiver from a player of cartridges
      13.24.23. Removal and installation of loudspeakers
+ 14. Electric schemes


944881c0

13.24.15.1. Replacement of making components

THE SWITCH ON THE DOOR OF THE DRIVER

PERFORMANCE ORDER
1. Remove a door upholstery.
2. Remove from a door a protective film about the switch.
3. Unscrew two screws, disconnect an electric socket of the switch and disconnect the switch from drive the lock lever.
4. Remove the switch.
5. Installation is made in sequence, return to removal.
6. If necessary replace rubber pillows of the switch.

SERVOMOTOR OF THE PASSENGER AND BACK DOOR

Switch replacement is made similarly, as well as replacement of the switch by doors of the driver (see above).

SERVOMOTOR OF THE COVER OF THE LUGGAGE CARRIER ON MODELS THE SEDAN

PERFORMANCE ORDER
1. Open a cover of a luggage carrier and remove from it plastic furnish.
2. Unscrew two nuts, fastening the mechanism of a latch and two screws, fastening a servomotor (1 – nuts of fastening of a latch of a cover of a luggage carrier, 2 – servomotor screws, 3 – draught).
3. Remove a servomotor from a latch and disconnect from it an electric socket.
4. Installation is made in sequence, return to removal.

THE MANAGEMENT BLOCK

PERFORMANCE ORDER
1. Remove the furnish panel in deepening for feet of the forward passenger.
2. On models with system of injection of fuel unscrew and move aside the block of management of system of injection of fuel together with an arm.
3. Unscrew the screw of fastening of an arm of the block of management.
4. Remove the management block together with an arm, then disconnect from it an electric socket and unscrew an arm.
5. Installation is made in sequence, return to removal.