Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   + 3.1. Maintenance service of cars with petrol engines
   - 3.2. Maintenance service of cars with diesel engines
      3.2.1. Operational materials and liquids
      3.2.2. Refuelling capacities
      - 3.2.3. Periodicity of service
         + 3.2.3.1. Each 400 km
         + 3.2.3.2. Each 7 500 km
         - 3.2.3.3. Each 15 000 km or 12 months
            3.2.3.3.1. Check and adjustment of turns of idling
            3.2.3.3.2. Check and adjustment of limiting turns of the engine
            3.2.3.3.3. Replacement of a fuel filtering element
            3.2.3.3.4. Check подтеканий liquids
            3.2.3.3.5. Replacement of a filtering element of the air filter (diesel engines 16D, 16DA)
            3.2.3.3.6. Check drivers belts (diesel engines 16D and 16DA)
            3.2.3.3.7. Check of density of a cooling liquid (diesel engines 16D and 16DA)
            3.2.3.3.8. Check of a condition and a tension of a gear belt
            3.2.3.3.9. Replacement of candles накаливания
            3.2.3.3.10. Replacement of a cooling liquid
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes


944881c0

3.2.3.3.4. Check подтеканий liquids
PERFORMANCE ORDER
1. Examine all demountable connections of the engine, check up presence of traces of a leak of oil or cooling liquid from under linings and epiploons. It is necessary to give special attention to places about a lining of a head of the block of cylinders, the oil filter and the oil pallet. Keep in mind that very weak leaks from under linings which develop throughout time wide interval are supposed, and that traces considerable подтеканий are subject to detection only. At detection of leaks replace a corresponding lining or an epiploon.
2. Check up also reliability and a condition of fastening of all pipelines and engine hoses. Be convinced of reliability of fastening of the conducting, available all collars, скоб and arms. Breakage or loss of collars of fastening of hoses and tubes leads their retyranny and to serious breakages in the future. It is recommended to replace wire collars tape with screws.
3. Carefully check up a condition of hoses of a heater, especially near exhaust pipes, if necessary fix hoses обвязкой or заизолируйте a thermal protection.
4. At detection of swellings, cracks or mechanical damages replace hoses. Cracks on a hose are is better visible at it перегибании.
5. Operation of the car before elimination of the found out faulty hose Is forbidden.