Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   + 3.1. Maintenance service of cars with petrol engines
   - 3.2. Maintenance service of cars with diesel engines
      3.2.1. Operational materials and liquids
      3.2.2. Refuelling capacities
      - 3.2.3. Periodicity of service
         + 3.2.3.1. Each 400 km
         + 3.2.3.2. Each 7 500 km
         - 3.2.3.3. Each 15 000 km or 12 months
            3.2.3.3.1. Check and adjustment of turns of idling
            3.2.3.3.2. Check and adjustment of limiting turns of the engine
            3.2.3.3.3. Replacement of a fuel filtering element
            3.2.3.3.4. Check подтеканий liquids
            3.2.3.3.5. Replacement of a filtering element of the air filter (diesel engines 16D, 16DA)
            3.2.3.3.6. Check drivers belts (diesel engines 16D and 16DA)
            3.2.3.3.7. Check of density of a cooling liquid (diesel engines 16D and 16DA)
            3.2.3.3.8. Check of a condition and a tension of a gear belt
            3.2.3.3.9. Replacement of candles накаливания
            3.2.3.3.10. Replacement of a cooling liquid
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

3.2.3.3.5. Replacement of a filtering element of the air filter (diesel engines 16D, 16DA)

PERFORMANCE ORDER

1. Remove an air inlet of the air filter which fastens to an arm of the lock of a cowl two screws.

2. Loosen the screws pulling together скоб (are specified by arrows).

3. Remove скобы and the case of the air filter with a filtering element.

4. Remove the fulfilled filtering element and wipe dry the case of the air filter.

5. Establish a new element in the case, having laid an element lining on a case edge.

6. The further installation is made in sequence, return to removal.