Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
- 4.1. Engine OHV (with a camshaft in the block of cylinders)
4.1.1. A technical characteristics
4.1.2. Compression check
4.1.3. The repair operations which are not demanding removal of the engine
+ 4.1.4. The repair operations demanding removal of the engine
4.1.5. Adjustment of backlashes of valves
+ 4.1.6. A head of the block of cylinders
4.1.7. Removal and installation of the oil pallet
+ 4.1.8. The oil pump
+ 4.1.9. Mechanism asterisks timing
+ 4.1.10. Pistons and rods
4.1.11. Removal and flywheel installation
4.1.12. Removal and installation of support of the power unit
4.1.13. Removal and installation of a camshaft and pushers
4.1.14. Removal and installation of a back sealing ring of a cranked shaft
4.1.15. Removal and installation of a cranked shaft and radical bearings
- 4.1.16. Check of elements of the engine
4.1.16.1. Check of a cranked shaft
4.1.16.2. Survey radical and шатунных bearings
4.1.16.3. Check of pistons and rods
4.1.16.4. Check of a camshaft and bearings
4.1.16.5. Check of asterisks, a chain and the tension mechanism
4.1.16.6. Check коромысел and pushers
4.1.16.7. Flywheel check
4.1.17. System of greasing of the engine
4.1.18. Removal and engine installation
4.1.19. Start of the engine after major repairs
+ 4.2. Engines OHC
+ 4.3. Engine DOHC with 16 valves
+ 4.4. Diesel engines 16D and 16DА
+ 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Check up a condition of teeths on asterisks. Teeths on an asterisk have the symmetric form, and in case of development on the one hand teeths it is necessary to replace an asterisk. At asterisk replacement it is necessary to replace also приводную a chain.
Check up a condition натяжителя chains in which wears out колодка, contacting with приводной a chain. In the presence of deterioration replace the mechanism of a tension of a chain. At installation of a new chain also it is necessary to establish the new mechanism of a tension of a chain. |
|
