Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   - 4.4. Diesel engines 16D and 16DА
      4.4.1. A technical characteristics
      4.4.2. A method of removal of the engine
      4.4.3. Engine repair
      4.4.4. Replacement of engine oil and the oil filter
      4.4.5. Check, removal, installation and adjustment of a gear belt
      + 4.4.6. A mechanism drive timing
      4.4.7. Removal and installation of a head of the block of cylinders
      4.4.8. Removal and camshaft installation
      4.4.9. Removal and installation of the oil pallet
      4.4.10. Removal and installation of the oil pump
      4.4.11. Removal and installation перепускного the valve
      4.4.12. Removal and installation of the water pump
      4.4.13. Removal, check and thermostat installation
      4.4.14. Removal and installation of pistons and rods
      4.4.15. Removal and flywheel installation
      + 4.4.16. Replacement of sealing rings
      4.4.17. Replacement of support of the power unit
      + 4.4.18. Removal of the engine from a transmission
      4.4.19. Engine and transmission division
      4.4.20. Engine repair
      4.4.21. Removal, repair and assemblage of the oil pump
      + 4.4.22. A head of the block of cylinders
      4.4.23. Check and restoration of details of the engine
      + 4.4.24. Check of elements of the engine
      4.4.25. Replacement of pushers, persistent linings and hydraulic pushers
      4.4.26. Engine assemblage.
      4.4.27. Connection of the engine with a transmission
      4.4.28. Engine and transmission installation
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes


944881c0

4.4.21. Removal, repair and assemblage of the oil pump Removal

PERFORMANCE ORDER

Unscrew screws and remove the top cover of the oil pump.

Repair

PERFORMANCE ORDER
1. Measure a backlash between teeths of gear wheels of the pump.
2. Measure a backlash between an external gear wheel and the pump case.
3. Measure a backlash between a plane of gear wheels and a plane of the case of the pump.
4. If necessary replace gear wheels. The label (it is specified by an arrow) on a surface of an external gear wheel should be directed outside.
5. Unscrew заглушку редукционного the valve of the oil pump. Get all elements of the valve and examine them on presence of damages and deterioration.
6. If necessary replace the switch of a control lamp of pressure of the oil, located in a back part of the pump.
7. If necessary remove перепускной the valve of the oil filter (it is specified by an arrow), having cut in it a carving tap М10. Establish the new valve.
8. Replace a forward sealing ring of a cranked shaft.

Assemblage

Assemblage is made in sequence, return dismantling.