| 1. Remove casings of a gear belt and a pulley of a cranked shaft. |
| 2. Remove a wire of weight from the accumulator. |
|
3. In the bottom part картера transmissions uncover a flywheel and coupling. |
| 4. To establish the piston №1 in ВМТ, turn a cranked shaft clockwise and combine an adjusting label on a pulley of the fuel pump with the corresponding index on a pump arm. |
|
5. Check up, that the adjusting label () a flywheel has been combined with the index () on картере couplings. |
| 6. Remove the vacuum pump and block a camshaft by means of the special tool (КМ-537). If you do not have this tool or he cannot be established, make marks in a pulley of a camshaft and a back casing of a gear belt. |
|
7. Loosen the bolts of fastening of the water pump (are specified by arrows) and turn the pump to weaken a tension газораспределительного a belt. |
| 8. Remove a forward support of the engine. |
| 9. Make on a belt a label specifying a direction of its rotation. |
| 10. Remove a gear belt. |
