Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
- 7. Start and gymnastics system
   7.1. A technical characteristics
   7.2. A finding of malfunctions in electric chains
   + 7.3. The accumulator
   + 7.4. The generator
   + 7.5. A starter
   7.6. Replacement of the lock of ignition
   7.7. Removal and installation of the gauge of pressure of oil
   7.8. Removal and installation of the gauge of level of oil on models with 16th valves
   - 7.9. The electric equipment of diesel engines 16D, 16DA, 17D and 17DR
      7.9.1. A technical characteristics
      7.9.2. Removal and accumulator installation
      - 7.9.3. A starter
         7.9.3.1. Removal and starter installation
         + 7.9.3.2. Replacement of brushes of a starter
      7.9.4. Check of system of preliminary heating
      7.9.5. Replacement of candles накаливания
      7.9.6. Removal and installation of the switch of a control bulb of pressure of oil
      7.9.7. Check, removal and installation of a temperature-sensitive element of the fan of a radiator
      7.9.8. Check of the fan of a radiator
      7.9.9. Removal and installation of the gauge of temperature of a cooling liquid
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes


944881c0

7.9.3. A starter

7.9.3.1. Removal and starter installation

MODELS WITH THE ENGINE 16D AND 16DA

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Disconnect wires from a starter.
3. Unscrew fixing bolts (at the left – the top fixing bolt, on the right – a back fixing bolt) and remove a starter.
4. Installation is made in sequence of return to removal.
5. Check up, that the plug плюсового wires did not concern a heat-shielding guard or the block of cylinders.

MODELS WITH THE ENGINE 17D AND 17DR

PERFORMANCE ORDER
1. Remove a fixing arm of a starter and a heat-shielding guard.
2. Disconnect wires from a starter.
3. Unscrew fixing bolts and remove a starter.
4. Installation is made in sequence, return to removal.