Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
- 10.1. A mechanical transmission
10.1.1. A technical characteristics
10.1.2. Oil replacement in a transmission
10.1.3. Removal and installation of the lever of a gear change
10.1.4. Removal and installation of a cable of blocking of inclusion of a reverse gear
10.1.5. Removal, installation and adjustment of draught of a gear change
10.1.6. Replacement of sealing rings
10.1.7. Check, removal and installation of the switch of lanterns of a backing
10.1.8. Removal and installation of a drive of a speedometer
+ 10.1.9. A transmission
+ 10.2. An automatic transmission
+ 10.3. Power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Backing lanterns join the switch плунжерного type which is screwed in in the top part картера transmissions. Check
| PERFORMANCE ORDER |
| 1. If backing lanterns do not work, first of all check up the fuse of an electric chain. |
| 2. Disconnect from the switch an electric socket and, using an ohmmeter, check up that switch contacts become isolated at inclusion of transfer of a backing. |
| 3. Otherwise the switch is faulty also it it is necessary to replace. |
|
Removal and installation
| PERFORMANCE ORDER |
| 1. For access improvement to the switch remove the accumulator. |
|
|
2. Disconnect from the switch an electric socket and unscrew the switch from картера transmissions and remove it together with consolidation. |
| 3. Installation is made in sequence, return to removal. |
| 4. Thus it is necessary to establish new consolidation of the switch. |
|
|
|
