Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
- 17. The appendix
   17.1. Search and elimination of malfunctions of system of start of the engine
   17.2. Search and elimination of malfunctions стеклоподъемников with an electric drive
   17.3. Search and elimination of malfunctions of control and measuring devices
   17.4. Search and elimination of malfunctions of system of illumination
   17.5. Search and elimination of malfunctions of the electronic alarm system (ETACS – Electronic Time and Alarm Control System)
   17.6. Search and elimination of malfunctions of the switch of a screen wiper
   17.7. Search and elimination of malfunctions of an external rear-view mirror with an electric drive
   17.8. The data for adjustments and the control
+ 18. Electroschemes


944881c0






17. 8. The data for adjustments and the control
Frequency of rotation of idling, mines-1
SOHC
800±100
DOHC
750±100
The carburettor
850±100
Corner of an advancing of ignition to ВМТ
SOHC
9°±5 °
DOHC
9°±5 °
The carburettor
5°±5 °
Belt deflection, by pressing it effort 98 Н (10 kg) in a place located on identical removal from pulleys
Belt of a drive of the generator and the pump of the amplifier of a steering
7-10 mm
Belt of a drive of a drive of the generator and the conditioner
New belt
5–5,5 mm
The belt which was in the use
6–7 mm
Interelectrode backlash of a spark plug
1,0-1,1мм
Pedal free wheeling сцеплени
6,13 mm
Distance from a pedal to a floor at the pressed pedal
90 mm
Course of a pedal of coupling
145 mm
Is minimum admissible distance to heads of rivets at limiting deterioration of frictional overlays of a disk of coupling
1,1 mm
Distinction of height of the ends диафрагменной springs
0,5 mm
Convergence of forward wheels
0±3 mm
Disorder of forward wheels
3±2 mm
Convergence of back wheels
0°±30'
Disorder of back wheels
-41°yo30'
Wheel palpation
Steel disks
The radial
0,6
The axial
1,0
Aluminium disks
The radial
0,3
The axial
0,3
Height of installation of a pedal of a brake
163,5 mm
Course of a pedal of a brake
135 mm
Backlash of the switch of stoplights
0,5-1,0 mm
Free wheeling of a pedal of a brake
3-8 mm
Distance from the pressed pedal of a brake to a floor
50 mm
Backlash between a pusher of the vacuum amplifier of brakes and the main brake cylinder
0 mm
Course of the lever of a lay brake, at a tightening its effort 196 Н
6-7 clicks
Is minimum admissible thickness of overlays of lobbies brake колодок
2,0 mm
Is minimum admissible thickness of a brake disk
17 mm
Palpation of a brake disk
0,05 mm
Is minimum admissible thickness of overlays back brake колодок
1,0 mm
As much as possible admissible diameter расточки a brake drum
182 mm
As much as possible admissible backlash of the piston in the working brake cylinder
0,15 mm
Air backlash of the gauge of frequency of rotation of a wheel
0,2-1,2 mm