Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of an angle of slope of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of an angle of rotation of forward wheels
   12.7. Check of a twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






12. A steering The general information

The steering consists of a steering wheel, a steering column, steering gear реечной transfer and steering draughts. The steering wheel is fixed on a shaft of a steering column and transfers effort on gear реечную transfer.

From each party gear рейка steering transfer it is connected by the spherical hinge to cross-section steering draught. Steering draughts transfer effort through steering tips and rotary fists to forward wheels. Such design of a steering has an easy course at absence люфта at turn of a steering wheel from an emphasis against the stop.

For simplification of turn of a steering wheel establish the hydraulic amplifier of a steering consisting of the pump of the amplifier of a steering, put in action a belt from a cranked shaft, a tank with a liquid, hoses and tubes, and steering transfer.

STEERING COLUMN / THE STEERING SHAFT

1 – a bolt, 15–20 Н•м;
2 – an intermediate shaft with universal hinges;
3 – a bolt, 15–20 Н•м;
4 – a bolt, 4–6 Н•м;
5 – a protective cover;
6 – a steering column;
7 – a clip.

Removal

PERFORMANCE ORDER
1. Remove the button of a sound signal and disconnect an electric socket.
2. Turn away a nut of fastening of a steering wheel.
3. Put combination labels on an end face of a steering shaft and a steering wheel and a stripper 09561–11002 remove a steering wheel.

The prevention

Do not knock on a steering wheel as these can damage a steering column.


4. Remove the bottom plug смятия.
5. Turn out screws and remove casings of a steering column.
6. Disconnect electric sockets from switches.
7. Remove multipurpose switches.
8. Turn out a bolt connecting the universal hinge and a shaft of a gear wheel of steering transfer.
9. Turn out bolts, крепящие a steering column to an arm, and remove a steering column from the car.

Dismantling

PERFORMANCE ORDER
1. Ослабьте a bolt of fastening of a steering shaft to the universal hinge also remove the universal hinge.
2. If necessary remove the lock of a steering column, preliminary having cut ножовкой on metals grooves in heads of cut off bolts. Turn away bolts a screw-driver with a flat edge and remove the lock of a steering column.

The prevention

At installation of the lock of ignition it is necessary to use new bolts with a cut off head.


3. If necessary remove the lever and an arm of the mechanism of adjustment of an angle of slope of a steering column.

The prevention

Do not assort a steering column and a steering shaft.



Check

PERFORMANCE ORDER
1. Check up a steering column and a steering shaft on absence of damages and deformations.
2. Check up the universal hinge of a steering shaft on absence люфта, damages and jammings.
3. Check up an arm of an angle of slope on absence of cracks and damages.
4. Check up work the mechanism of the lock of a steering column.
5. Check up a protective cover on absence of cracks or damages.

Assemblage

PERFORMANCE ORDER
1. Assemblage is spent to sequences to return dismantling.
2. Combine the lock of a steering column with a ledge of a column and insert the ignition key to check up action of the lock of a steering column before a tightening of bolts with cut off heads.

The prevention

Do not use usual screws for fastening of the lock of a steering column.



Installation

PERFORMANCE ORDER
1. Establish the universal hinge on a shaft of a steering column.

The prevention

Be convinced that the universal hinge is established correctly, as is shown in drawing. Check up, that the bolt has been established correctly in dredging of a shaft of a gear wheel of steering transfer and the bolt end left from an opposite side of the universal hinge.


2. Establish the universal hinge together with shaft of a steering column on a shaft of a gear wheel of steering transfer and temporarily fix a bolt.
3. Establish a shaft of a steering column to an assembly frame.

The prevention

At installation be careful not to bend a steering column.


4. Tighten a bolt of fastening of the universal hinge with shaft of a gear wheel of steering transfer.
5. Establish the multipurpose switch and connect electric sockets.
6. Establish casings of a steering column.
7. Establish the bottom plug смятия.
8. Establish a steering wheel.

The prevention

After steering wheel installation be convinced that the labels put before removal, were combined also a steering wheel is in position for rectilinear movement.