Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


13. Brake system

On cars the working brake system with a hydraulic drive is used.
The system works as follows:

– The brake pedal is connected with the main brake cylinder;
– When the pedal is pressed, the liquid under pressure from the main brake cylinder on metal tubes and flexible hoses is transferred to forward and back brake mechanisms;
– Working brake cylinders represent hydraulic modulators which transform the pressure of a liquid created in the main brake cylinder, to moving of elements of the brake mechanism;
– Forward and back pistons of a support of a brake move and at the expense of a friction about brake disks and drums provide demanded delay of the car;
– At отпускании pedals of a brake pressure in system decreases. Brake колодки and pistons come back to neutral or to a starting position and braking stops.

At reduction of level of a brake liquid the gauge of level of a liquid in the main brake cylinder includes a control lamp in combinations of devices. If the control lamp burns, first of all, check up that the lay brake is released, as the lamp specifies in the lowered level of a liquid and the tightened lay brake.