Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes








13.9. Brake tubes and hoses

Check

PERFORMANCE ORDER
1. Check up brake hoses on absence of cracks and local вспучивания. If necessary, replace a brake hose.
2. Check up brake tubes on absence of cracks, damages and corrosion.
3. Check up connecting nuts of brake hoses on absence of damages and leak.

Installation

PERFORMANCE ORDER
1. Establish brake tubes, without overwinding them.
2. Brake hoses are necessary for establishing as it is possible further from welded seams, sides or mobile parts of the car.
3. Tighten all connections by the demanded moments of an inhaling.

The moment of an inhaling of connecting nuts: 13–17 Н•м
The moment of an inhaling of brake hoses to forward supports: 25–30 Н•м