Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


13.18. Hydraulic block HECU ABS


1. Separate brake tubes from block HECU.
2. Turn out bolts of fastening of an arm and remove block HECU together with an arm.

The prevention

Do not assort hydraulic block HECU.
Block HECU transportation is necessary for spending in vertical position with the apertures of the block closed approaching заглушками as the brake liquid should not merge from the block.

3. Disconnect from block HECU an electric socket.


1. Installation is spent to sequences, return to removal.
2. Tighten bolts of fastening of the modulator and a nut of fastening of brake tubes the demanded moments of an inhaling.

The inhaling moments:
Bolt of fastening of block HECU: 8–10 Н•м
Connecting nuts of fastening of brake tubes: 13–17 Н•м