Repair and car operation
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. A transmission
- 9.1. A mechanical transmission
9.1.2. Check of level of oil
9.1.3. Replacement трансмиссионного oils
9.1.4. Replacement of an oil sealing ring of a power shaft
9.1.5. Replacement of a cable of a drive of a speedometer
9.1.6. Removal and transmission installation
9.1.7. Transmission repair
9.1.8. The gear change mechanism
9.1.9. A hydraulic drive of coupling
9.1.10. The gear change lever
+ 9.2. An automatic transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes
9. A transmission
9.1. A mechanical transmissionThe transmission will transform a twisting moment transferred from the engine on size and a direction. It is necessary for maintenance of optimum speed and passableness of the car, and also for the most economic work of the engine and movement of the car by a backing. Besides, the transmission separates the engine and transmission during a stop and parking of the car and at its movement by inertia with working engine.
Transmission details are placed in картере which is screwed by bolts on a back part of the engine.
The twisting moment from the engine through coupling is transferred to an entrance shaft of a transmission. A target shaft the transmission transfers a twisting moment through differential to power shafts. Transfer inclusion is carried out by moving sliding муфты the synchronizer therefore the gear wheel rigidly incorporates to transmission shaft.
The transmission represents very difficult unit and its repair it is necessary to make in a specialised workshop, therefore in the present chapter removal and transmission installation are resulted only.
For transmission removal it is necessary to lift the car and to fix it in this position. Also use of a stationary jack is necessary.