Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
- 3. Greasing system
   3.1. Specifications
   3.2. An engine oil choice
   3.3. The gauge of pressure of oil
   3.4. Check of level of engine oil
   3.5. Engine oil replacement
   3.6. Replacement of the oil filter
   3.7. The oil pump of engine SOHC
   3.8. The oil pump of engine DOHC
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






3. Greasing system The greasing system consists of the oil pallet, the oil pump, the oil filter and various channels. The oil pump is put in action from a cranked shaft. The perepusknoj valve in the oil pump supports pressure in system of greasing of the engine at certain level, At its excess opens перепускной the valve and an oil part flows down back in the oil pallet. In the filter is available перепускной the valve through which in case of strong pollution of the filter crude oil arrives at once in an oil highway.

The oil cleared by the oil filter arrives in the main oil highway. Further the oil stream is divided into two streams. One stream of oil moves to radical bearings of a cranked shaft, and through the drilled channels greases and шатунные bearings. For cooling of pistons oil through sprays is sprayed on the bottom part of pistons.

The second stream of oil on channels moves to a head of the block of cylinders for greasing of bearings of camshafts and in hydraulic pushers.

After passage through a head and the block of cylinders, oil flows down in the oil pallet.