Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
13.1. Specifications
13.2. Antiblocking system of brakes (ABS)
13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
13.4. Check and adjustment of position of a pedal of a brake
13.5. Check of the vacuum amplifier of brakes
13.6. Prorolling of hydraulic system of a drive of brakes
13.7. Adjustment of a course of a lay brake
13.8. The vacuum amplifier of brakes
13.9. Brake tubes and hoses
13.10. A pressure regulator
13.11. A brake pedal
13.12. Replacement of lobbies brake колодок
13.13. A support of a forward brake
13.14. The main brake cylinder
13.15. Replacement brake колодок on back drum-type brakes
13.16. Replacement of the working brake cylinder
13.17. A lay brake
13.18. Hydraulic block HECU ABS
13.19. The gauge of frequency of rotation of a wheel
13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes
|
| 1 – a rotor;
2 – the forward gauge of frequency of rotation of a wheel, 8–9,5 Н•м;
3 – the back gauge of frequency of rotation of a wheel, 15,5–16,5 Н•м. |
Removal The forward gauge of frequency of rotation of a wheel
PERFORMANCE ORDER |
| Turn out a bolt and remove the forward gauge of frequency of rotation of a wheel after a socket detachment. |
| The back gauge of frequency of rotation of a wheel
PERFORMANCE ORDER |
1. Remove a pillow of back sitting. | 2. Remove an upholstery of a back rack. | | 3. Remove a back wheel. | |
4. Remove the back gauge of frequency of rotation of a wheel after a socket detachment. |
| Check
PERFORMANCE ORDER |
| 1. Measure resistance of the gauge of frequency of rotation of a wheel. Resistance:
The forward gauge: 1275–1495 Ohm The back gauge: 1275–1495 Ohm |
| 2. Establish the gauge of frequency of rotation of a wheel on the car and, having connected the voltmeter to gauge contacts, measure the pressure developed by the gauge at rotation of a wheel. | The prevention Switch the voltmeter for alternating voltage measurement. | |
|
|