|
|
Hyundai AccentRepair and car operation |
|
|
Hyundai Accent + 1. The maintenance instruction + 2. The engine + 3. Greasing system + 4. Cooling system + 5. The control, toxicity decrease + 6. Fuel system + 7. Ignition system + 8. Coupling + 9. A transmission + 10. Axes and power shafts + 11. A suspension bracket + 12. A steering - 13. Brake system 13.1. Specifications 13.2. Antiblocking system of brakes (ABS) 13.3. Prorolling of hydraulic system of a drive of brakes with scanner use 13.4. Check and adjustment of position of a pedal of a brake 13.5. Check of the vacuum amplifier of brakes 13.6. Prorolling of hydraulic system of a drive of brakes 13.7. Adjustment of a course of a lay brake 13.8. The vacuum amplifier of brakes 13.9. Brake tubes and hoses 13.10. A pressure regulator 13.11. A brake pedal 13.12. Replacement of lobbies brake колодок 13.13. A support of a forward brake 13.14. The main brake cylinder 13.15. Replacement brake колодок on back drum-type brakes 13.16. Replacement of the working brake cylinder 13.17. A lay brake 13.18. Hydraulic block HECU ABS 13.19. The gauge of frequency of rotation of a wheel 13.20. Search and elimination of malfunctions + 14. A body + 15. A central air + 16. The electric equipment + 17. The appendix + 18. Electroschemes 
|
13.1. Specifications
Elements of brake system |
| The main brake cylinder | Type | Тандемный |
| Diameter of the cylinder, mm | 22,22 | |
| The vacuum amplifier of brakes | Type | The vacuum |
| Effective diameter, mm | 228,6 | |
| Parity | 4,0:1 | |
| Forward brakes | Type | Disk, ventilated |
| Thickness of a brake disk, mm | 19 | |
| Diameter of a brake disk, mm | 241 | |
| Thickness brake колодок, mm | 9 | |
| Diameter of the cylinder, mm | 54 | |
| Back drum-type brakes | Internal diameter of a brake drum, mm | 180 |
| Thickness brake колодок, mm | 4,8 | |
| Diameter of the cylinder, mm | 19,05 |
Adjusting data
| Height of installation of a pedal of a brake, mm | 163,5 |
| Course of a pedal of a brake, mm | 135 |
| Backlash of the switch of stoplights, mm | 0,5–1,0 |
| Free wheeling of a pedal of a brake, mm | 3–8 |
| Distance from the pressed pedal of a brake to a floor, mm | 50 |
| Backlash between a pusher of the vacuum amplifier of brakes and the main brake cylinder, mm | 0 |
| Course of the lever of a lay brake at a tightening its effort 196 Н | 6–7 clicks |
| Is minimum admissible thickness of overlays of lobbies brake колодок, mm | 2,0 |
| Is minimum admissible thickness of a brake disk, mm | 17 |
| Palpation of a brake disk, mm | 0,05 |
| Is minimum admissible thickness of overlays back brake колодок, mm | 1,0 |
| As much as possible admissible diameter расточки a brake drum, mm | 182 |
| As much as possible admissible backlash of the piston in the working brake cylinder, mm | 0,15 |
Antiblocking system of brakes
| Element | The name |
Value |
| The block of management ECU | Pressure of a food, In | 10–16 |
| Range of temperatures, �С | –40 … 110 | |
| Control lamp ABS | Pressure of a food, In | 12 |
| Consumed current, мА | 80 | |
| The gauge of frequency of rotation of a wheel | Resistance, Ohm | 1275–1495 |
| Target frequency, Hz | 15–2000 | |
| Air backlash, mm 0,2–1,2 | 0,2–1,2 | |
| Hydraulic block HECU | Weight, kg | 2,5 |
| The engine | 12 IN, 30 AND | |
| Capacity of the engine, Vt | 180 | |
| Productivity, sm3/with | 5,5 |
The inhaling moments, Н•м
| The forward gauge of frequency of rotation of a wheel | 8–9,5 |
| The back gauge of frequency of rotation of a wheel | 15,5–16,5 |
| Bolts of fastening of the block of management ECU and hydraulic block HECU | 8–10 |
| Bolts of fastening of arms of the block of management ECU and hydraulic block HECU | 9–10 |
| Six brake tubes to the hydraulic block | 16 |
| Nuts of fastening of the main brake amplifier to the vacuum amplifier of brakes 8–12 | 8–12 |
| Nuts of fastening of the vacuum amplifier of brakes | 8–12 |
| The union of a vacuum hose of the vacuum amplifier of brakes to an inlet collector | 8–12 |
| The prorolling union | 7–9 |
| Connecting nuts of brake tubes | 13–17 |
| Directing finger of a support | 35–45 |
| Bolt of the directing plug | 22–32 |
| Bolts of fastening of a support to a rotary fist | 65–75 |
| Hollow bolt of fastening of a brake hose to a support | 25–30 |