| 1. On the car standing on a firm horizontal surface, establish forward wheels for rectilinear movement. |
| 2. Increase frequency of rotation of a cranked shaft of the engine to 1000 mines-1. |
The prevention After check leave the engine to work on frequency of rotation of idling
|
| 3. Hook on a dynamometer for a steering wheel spoke in a place, the most remote from the wheel centre. With the forward wheels established for rectilinear movement, measure effort which is necessary for putting to a steering wheel for turn of wheels to the left and to the right. Effort: 34,3 Н
|
| 4. Check up that at steering wheel turn the appendix of excessive efforts is not required. |
5. If the measured effort exceeds demanded value, spend following checks:
– Check up on absence of damage protective covers of spherical hinges of the bottom lever and a tip of steering draught;
– A twisting moment which it is necessary to put for проворачивания pins of the spherical hinge of a tip of steering draught;
– A twisting moment which it is necessary to put for проворачивания pins of the spherical hinge of the bottom lever. |
