Hyundai Accent

Repair and car operation

12.19. Search and elimination of malfunctions (a steering with the amplifier)

Sign	Plausible reason	Elimination method
The increased free wheeling of a steering wheel	Steering transfer is unreliably fixed	Tighten
	Bolts of steering transfer are unreliably tightened	Tighten bolts
	Big люфт or deterioration of a tip of steering draught	Replace a tip of steering draught
The steering wheel turns hardly	Проскальзывание a belt of a drive of the pump of the amplifier of a steering	Adjust a belt tension
	The belt of a drive of the pump of the amplifier of a steering is damaged	Replace a belt
	Low level of a liquid	Add a liquid
	Air in a liquid	Remove air
	Hoses are polluted or damaged	Replace hoses
	The insufficient pressure created by the pump	Repair or replace the pump
	Залипание the valve of adjustment of pressure	Replace
	Internal leaks in the pump of the amplifier of a steering	Replace the damaged details
	Excessive infiltration of a liquid from gear рейки and gear wheels in картер steering transfer	Replace the damaged details
	Damage картера steering transfer or the valve of adjustment of pressure	Replace the damaged details
The steering wheel does not come back in a starting position properly	Too big moment проворачивания the spherical hinge of a tip of steering draught	Replace a tip of steering draught
	It is too strongly tightened gear рейка steering transfer	Adjust a tension
	Internal connection of steering draught or the spherical hinge are turned hardly	Grease or replace the spherical hinge
	It is weakened fastenings of steering transfer in an arm	Tighten
	Hinges of a steering shaft or sealing ring of a body are worn out	Replace
	Steering transfer is damaged	Replace steering transfer
	The bearing of a gear wheel of steering transfer is damaged	Replace
	Hoses are polluted or damaged	Replace hoses
	Damage of the valve of adjustment of pressure	Replace
	The bearing of a shaft of the pump of the amplifier of a steering is damaged	Replace
Extraneous noise at steering work	Hissing sound in steering transfer All amplifiers of a steering publish additional noise. One of the most widespread is a hissing sound when the steering wheel is turned on the motionless car. This sound will be most obvious at steering wheel turn at the pressed pedal of a brake. There are no relations between this noise and steering work. Do not replace the valve if "hissing" noise does not become extreme. The new valve will publish also small noise.
Roaring sound in steering transfer	Люфт between hoses and a car body	Lay properly and fix hoses
	Steering transfer is loose Fix steering transfer	Fix steering transfer
	The tip of steering draught and / or the spherical hinge is loose	Tighten connections
	The tip of steering draught and / or the spherical hinge is worn out	Replace
Noise in the pump of the amplifier of a steering	Low level of a liquid	Add a liquid
	Air in a liquid	Remove air
	Bolts of fastening of the pump are not tightened	Tighten bolts

---

The prevention

Quiet noise should be audible right after engine start-up at air temperature-20 °C. It is connected with properties of the liquid applied in the amplifier of a steering, and is not a malfunction sign.

---