Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of an angle of slope of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of an angle of rotation of forward wheels
   12.7. Check of a twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






12.3. Steering transfer without the steering amplifier
1 – a tip of steering draught;
2 – a collar;
3 – the goffered protective cover;
4 – a collar;
5 – a counternut, 50–70 Н•м;
6 – a stopper;
7 – a spring;
8 – an emphasis;
9 – a rubber support;
10 – an arm;
11 – a bolt,
12 – gear рейка;
13 – steering transfer;
14 – a shaft of a gear wheel of steering transfer;
15 – a gear wheel;
16 – a sealing ring;
17 – the bearing;
18 – a lock ring;
19 – the hinge, 80–100 Н•м;
20 – steering draught;
21 – a counternut, 50–55 Н•м;
22 – a nut, 16–34 Н•м.

Removal

PERFORMANCE ORDER
1. Remove a forward wheel.
2. Turn out a bolt connecting the universal hinge and a shaft of a gear wheel of steering transfer.
3. Take шплинты and turn away a nut of fastening of pins of spherical hinges of tips of steering bent for to rotary fists. A stripper 09568–31000 squeeze out pins of spherical hinges of tips of steering draughts from rotary fists.
4. Remove a back support of the engine.
5. Turn out bolts and remove arms of fastening of steering transfer.
6. Move steering transfer and get it on the right side of the car.

Dismantling

Before dismantling measure the moment necessary for проворачивания of a shaft of a gear wheel of steering transfer on the average position gear рейки.

PERFORMANCE ORDER
1. Clear steering transfer and fix in a vice which sponges are closed by a soft material.

The prevention

At fastening of steering transfer in a vice wrap up steering transfer by a fabric and be careful not to damage it at compression of a vice.


2. Remove steering draught.
3. Turn out a stopper counternut.
4. The special tool 09565–21100 turn out a stopper.
5. Remove a spring, a rubber lining and an emphasis.
6. Remove a protective cover.
7. Remove a sealing ring with картера steering transfer.
8. Remove a lock ring from картера steering transfer and get a gear wheel together with the bearing.
9. Remove from a gear wheel a lock ring of a cover подшипникового knot.
10. The special tool 09565–21000 get the bearing from a gear wheel.
11. Remove a protective cover.
12. Using a chisel, turn away a nut of fastening of the right steering draught.
13. Move gear рейку completely to картеру transfers and fix gear рейку in a vice which sponges are closed by a soft material. Ослабьте fastening also remove steering draught from steering transfer.
14. Get gear рейку from картера steering transfer after gear wheel removal. 

The prevention

For an exception of damage of teeths gear рейки get it on the left side.



Check

Check up elements of steering transfer in the places shown in drawing.

 

Assemblage

PERFORMANCE ORDER
1. Before assemblage wash out all details in solvent.
2. The special tool 09432–22000 запрессуйте the bearing in a gear wheel.
3. Establish a lock ring on a gear wheel.
4. Grease gear рейку, a gear wheel, the plug, the bearing and other surfaces of sliding.

Recommended lubricant: SAE J310a, NLGI №2

The prevention

Do not block lubricant the air channel in the plug картера.


5. After installation gear рейки in картер steering transfer establish in an aperture a gear wheel, having combined it with gear рейкой.

The prevention

Be convinced that gear рейка it is inserted in картер steering transfer on the left side.
Wipe superfluous greasing.


6. Choose and establish corresponding type of a lock ring to minimise люфт in an axial direction of a gear wheel.
7. Before installation of a sealing ring grease its working edge.

The prevention

At installation it is necessary to use a new sealing ring.


8. Establish an emphasis, a rubber lining and a spring.

The prevention

Grease чашевидную an emphasis part.


9. The special tool 09565–21000 screw a stopper.
Tighten a stopper the moment 11 Н•м then tighten on a corner 30 °–60 °. Fix position of a stopper by a counternut.

The moment of an inhaling of a counternut: 50–70 Н•м

The prevention

Regulate position of a stopper with steering transfer to neutral position.
Put a hermetic layer between a counternut and картером steering transfer.


10. Establish a tip of steering draught and a protective cover. Fix a cover new collars.
11. Measure preliminary loading with a protective cover and lubricant, turning a gear wheel the special tool 09565–11100 on one turn everyone 4–6 with. Also measure starting effort gear рейки.

Full preliminary loading of a gear wheel:
±180 ° or it is less from neutral position: 0,4–1,1 Н•м
±180 ° or it is more from neutral position: 0,3–1,6 Н•м
Starting effort gear рейки: 50–300 Н

The prevention

Preliminary loading of a gear wheel should be measured on all length of a course of steering transfer.



Installation

PERFORMANCE ORDER
1. Establish the rubber plug of fastening on steering transfer, as is shown in drawing.
2. Establish a gear wheel in gearing both steering transfer and gear wheel knot to a cross-section beam.


The prevention

Be convinced that at installation of steering transfer and a gear wheel they are not warped or damaged. Be careful not to tighten connection by the excessive moment of an inhaling as it warps steering transfer and a gear wheel and increases effort of a steering.


3. Tighten a connecting bolt.

The inhaling moment: 15–20 Н•м

4. Fix steering draughts on a rotary fist.

The moment of an inhaling of a nut of fastening of a pin of the spherical hinge of steering draught: 16–34 Н•м

The prevention

Combine a groove of a nut with an aperture for шплинта and tighten a nut the demanded moment.


5. Adjust corners of installation of wheels.
6. Be convinced that the protective cover is not overwound and fix its collar.