Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of an angle of slope of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of an angle of rotation of forward wheels
   12.7. Check of a twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






12.14. Check of pressure of a liquid in hydraulic system
PERFORMANCE ORDER
1. Disconnect a pressure head hose from the pump of the amplifier of a steering. Between the disconnected pressure head hose and the pump connect the special measuring tool, as is shown in drawing.
2. Pump over a hydraulic drive of the amplifier of a steering, then start up the engine and turn a steering wheel some times so that the liquid temperature has raised to 50°C.
3. Increase frequency of rotation of a cranked shaft of the engine to 1000мин–1.
4. Close the valve of the switch of the special tool and measure pressure.

The pressure of a liquid created by the pump of the amplifier of a steering: 6,2 мПа


The prevention

Do not hold the valve of the switch of the special tool closed more than 10 with.


5. Remove special tools and connect a pressure head hose to the pump, having tightened a connecting nut of a hose the demanded moment.

The inhaling moment: 55–65 Н•м

6. Remove air from a hydraulic drive of the amplifier of a steering.