| 1. At presence remove a wheel cap, then ослабьте bolts of fastening of a back wheel. |
| 2. Lift a back part of the car and fix on supports. |
| 3. Remove a back wheel. |
| 4. Release a manual brake. |
| 5. Unscrew the screw of fastening of a brake drum and remove a brake drum. |
| 6. If the brake drum is kept brake колодками, remove заглушку from an aperture in a brake board and, using a screw-driver, move a control lever of a manual brake to brake колодке that brake Pads have departed from a drum. |
| 7. If necessary ослабьте a tension of a cable of a manual brake. |
| 8. Note an arrangement and, using flat-nose pliers, remove the top returnable spring compressing brake Pads. |
| 9. Remove the top ends brake колодок from pistons of the working brake cylinder. |
| 10. For reduction of losses of a brake liquid uncover with пополнительного a tank of brake system. |
| 11. Close a mouth of a tank polyethylene and again screw a cover. It is necessary that the cover tightly closed пополнительный a tank. |
| 11. Remove a dirt round a place of connection of a brake tube to a back part of the working brake cylinder. |
| 12. Unscrew a connecting nut. |
| 13. Being careful, take a brake tube from the working brake cylinder and close its stopper. |
| 14. Unscrew two bolts of fastening of the working brake cylinder to a brake board and, being careful, remove the working brake cylinder. |
