Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Prorolling of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Lobbies brake Pads
   11.5. Replacement back brake колодок on disk brakes
   11.6. Replacement back brake колодок on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. A support of a forward brake
   + 11.11. A support of a back disk brake
   + 11.12. The back working brake cylinder
   + 11.13. The main brake cylinder
   - 11.14. Valves of adjustment of pressure
      11.14.1. Check of valves
      11.14.2. Removal of valves
      11.14.3. Installation of valves
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of a manual brake
   11.19. Removal and installation of the lever of a manual brake
   11.20. Replacement brake колодок a manual brake on back disk brakes
   + 11.21. Antiblocking system of brakes (ABS)
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

11.14. Valves of adjustment of pressure

11.14.1. Check of valves

THE GENERAL DATA

For exact check of valves of adjustment of pressure use of the special equipment is necessary. Valves of adjustment of pressure are faulty, if at sharp braking back wheels are blocked before lobbies or do not brake absolutely.

PERFORMANCE ORDER

1. For check of working capacity of valves of adjustment of pressure on models the Versatile person and a Van, established on the car bottom, ask the assistant to press sharply a pedal of a brake and observe of the valve.

2. In the course of check the car should stand on wheels.

3. Draught of the valve should move by pressing and at release brake pedals. Otherwise the valve of adjustment of pressure is not serviceable.