Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      + 6.1.11. Carburettors
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes


944881c0

6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
THE GENERAL DATA

On some carburettors the electromagnetic valve of a stopping delivery of fuel is established. It электрически the operated valve which interrupts fuel giving in idling system at ignition deenergizing therefore work of the engine after ignition deenergizing is prevented.

The valve of a stopping delivery of fuel is included all time while ignition is included. If the valve is faulty or to it pressure does not move, the engine will stop or work unstably on idling turns though on higher turns it will work normally.

PERFORMANCE ORDER
1. At valve check first of all check up that to it pressure moves at ignition inclusion.
2. Unscrew the valve from the carburettor and connect the case of the valve to the negative plug of the accumulator. At giving of positive pressure of the accumulator on valve contact there should be accurately heard click, thus a needle on a valve tip should be involved.
3. If the valve is faulty, it is necessary to replace it.