Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
- 10. Axes and power shafts
10.1. Specifications
10.2. A power shaft
10.3. A power shaft with SHRUS ball and Birfield type
10.4. A power shaft with SHRUS Birfield and трипоидного type
10.5. A rotary fist and a nave of a forward wheel
10.6. A back axis
10.7. Search and elimination of malfunctions
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes
|
1 – cтопорное a ring;
2 – the SHRUS трипоидного type;
3 – cтопорное a spring ring;
4 – a support of rollers трипоидного connections;
5 – a protective cover;
6 – a collar;
7 – a collar;
8 – a nut, 220–260 Н•м; | 9 – a dustproof ring;
10 – SHRUS Birfield;
11 – a protective cover;
12 – a collar;
13 – a collar;
14 – dynamic демпфер;
15 – a clip dynamic демпфера. |
Dismantling
The prevention Do not assort the SHRUS of type Birfield.
For greasing of SHRUS use only special greasing.
At SHRUS assemblage it is necessary to establish new collars.
| PERFORMANCE ORDER |
| 1. Remove collars and pull together a protective cover from a ball SHRUS of a power shaft. |
The prevention Be careful not to damage a protective cover.
| | 2. Special пассатижами remove a lock ring and a hammer through a brass core bring down a support of rollers трипоидного connections from a power shaft. |
The prevention At removal of a support of rollers трипоидного connection with a power shaft do not establish a brass core on rollers.
| | 3. Clear a support of rollers трипоидного connections. | |
4. Remove collars and pull together protective covers of a ball SHRUS and SHRUS Birfield. |
|
|
The prevention If the protective cover is repeatedly used before removal of a cover for its protection, wrap up шлицы a power shaft a sticky tape.
| |
Check
| PERFORMANCE ORDER |
| 1. Check up a condition шлицов a power shaft. |
| 2. Check up on absence of traces of a rust, water and extraneous subjects in a protective cover of SHRUS Birfield. | |
3. Check up a support of rollers трипоидного connections on absence of deterioration or corrosion. | | 4. Check up deepening in SHRUS Birfield on absence of deterioration or corrosion. | | 5. Check up dynamic демпфер on absence of damages. | |
Assemblage
| PERFORMANCE ORDER |
| 1. Before installation of a cover for its protection wrap up шлицы a power shaft from outside трипоидного the hinge a sticky tape. |
| 2. Put greasing on a power shaft and establish a cover. Greasing of SHRUS Birfield: Centoplex 278M/136K TJ
Greasing трипоидного the SHRUS: KLKTJ41–182 (MS511–50, Korea KLUBER) |
| 3. For installation dynamic демпфера arrange SHRUS Birfield on a straight line in relation to a shaft, arrange демпфер on distance 437±3 mm and fix its clip. |
| 4. Enclose greasing in a protective cover трипоидного the SHRUS and establish a cover on the hinge. Protective cover трипоидного the hinge:
Greasing total: 95±6 г
The hinge: 60±3 г
Protective cover: 35±3 г |
| 5. Add in SHRUS Birfield so much greasing, how many it has been wiped during hinge check. | | 6. Establish covers. | | 7. Fix a protective cover of SHRUS Birfield collars. | | 8. Fix covers so that the length of a power shaft corresponded to demanded values Length of the left power shaft:
With a mechanical transmission: 645,2±2 mm
With an automatic transmission: 648,9±2 mm
Length of the Right power shaft:
With a mechanical transmission: 930,5±2 mm
With an automatic transmission: 934,2±2 mm. | |
|
|
