Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
- 11. A suspension bracket
   11.1. Specifications
   11.2. The bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Plug replacement (G) the bottom lever
   11.5. The forward stabilizer of cross-section stability
   11.6. A rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and) a back suspension bracket
   11.9. The back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Deterioration of tyres
   11.13. Chains противоскольжения
   11.14. Wheel palpation
   11.15. A tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminium alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of deterioration of tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






11.4. Plug replacement (G) the bottom lever
PERFORMANCE ORDER
1. Establish the special tool on the bottom lever.
2. Squeeze out the plug.
3. Grease with a soap solution following details:

– An external surface of the new plug;
– An internal surface of fastening of the plug of the bottom lever.
4. The special tool establish the new plug on the bottom lever.

Check


PERFORMANCE ORDER
1. Check up the plug on absence of deterioration and deterioration of its condition.
2. Check up the bottom lever on absence of a bend or damages.
3. Check up a protective cover of the spherical hinge on absence of cracks.
4. Check up a condition of all bolts.
5. Check up a twisting moment which it is necessary to put for проворачивания pins of the spherical hinge of the bottom lever.
6. If there are cracks in a protective cover, replace the spherical hinge.
7. Some times shake here and there a pin of the spherical hinge of the bottom lever.
8. Measure a twisting moment necessary for проворачивания of a pin of the spherical hinge of the bottom lever.

Twisting moment: 3,5–10 Н•м

9. If the twisting moment exceeds admissible values, replace the spherical hinge.
10. If the twisting moment considerably below admissible value, the spherical hinge can repeatedly be used, if it is not got jammed and has no excessive люфта.