Hyundai Accent

Repair and car operation

14.6. A back door Removal and installation

PERFORMANCE ORDER

1. Release скобу handle fastenings стеклоподъемника and remove the handle. Скоба it is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the ends скобы, hook скобу and release it. Thus it is necessary to pull the handle on itself that she after clearing скобы has acted in film with шлицов a shaft стеклоподъемника. 2. Turn out the screw of fastening of the internal handle, then press the handle in a direction of loops of a door and remove it from a door upholstery. 3. Turn out screws of fastening of an upholstery of a door. 4. Insert a stripper of an upholstery of a door between an upholstery of a door and a door and release percussion caps. 5. Remove an upholstery of a door and lower glass. 6. Turn out screws of fastening of glass to a plate стеклоподъемника. 7. Turn out screws and a bolt of fastening back directing glasses. 8. Remove motionless glass from a back door. 9. Remove mobile glass from a back door. 10. Remove external влагозащитную a strip from a back door. 11. Turn out screws and remove стеклоподъемник. Disconnect draught from the internal handle of a door. 12. Remove a latch of a door and the door-lock modulator. 13. Remove the external handle. 14. Installation is spent to sequences, return to removal.