| 1. At check of working capacity of the accelerating pump it is necessary in поплавковую to submit the chamber fuel from the additional tank. Establish the primary chamber of the carburettor over a volumetric glass. |
| 2. Ten times completely open and close throttle заслонку, and opening заслонки make within 1 second then return заслонку in a starting position and in 3 seconds repeatedly open it. Check up, that the cam of the accelerated turns of idling did not limit moving throttle заслонки. |
| 3. Measure quantity of fuel which the accelerating pump has submitted to a volumetric glass, and compare this data with resulted in in subsection 6.1.1. |
|
4. If adjustment is required, ослабьте the screw of fastening and turn a cam in a demanded direction then tighten the screw and repeatedly check up productivity of the accelerating pump ((+) – productivity increase, (-) – productivity reduction). |
