Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
- 2. The engine
   + 2.1. Engines SOHC
   - 2.2. Engines DOHC
      2.2.1. Specifications
      2.2.2. Compression check
      2.2.3. A gear belt
      2.2.4. A poliklinovoj belt
      2.2.5. Engine support
      2.2.6. A forward cover
      2.2.7. The air filter (ACL)
      2.2.8. A head of cylinders
      2.2.9. Camshafts
      2.2.10. Replacement of a saddle of the valve
      2.2.11. Replacement of the directing plug of the valve
      2.2.12. The valve
      2.2.13. Rods
      2.2.14. A cranked shaft
      2.2.15. A flywheel
      2.2.16. The piston
      2.2.17. A final collector
      2.2.18. An inlet collector and the air chamber
      2.2.19. The block of cylinders
      2.2.20. Removal and engine and transmission installation
      2.2.21. System of release of the fulfilled gases
      2.2.22. Search and elimination of malfunctions
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






2.2.18. An inlet collector and the air chamber
1 – an inlet collector;
2 – a bolt, 15–20 Н•м;
3 – throttle knot;
4 – a bolt, 15–20 Н•м;
5 – a lining;
6 – a fuel highway;
7 – the air compensatory chamber.

Removal

PERFORMANCE ORDER
1. Disconnect sockets from gauges of a measuring instrument of the expense of air and position throttle заслонки.
2. Remove the inlet air branch pipe connected to throttle knot.
3. Remove an accelerator cable.
4. Remove a ventilation hose картера and a vacuum hose of the vacuum amplifier of brakes.
5. Separate connections of a vacuum hose.
6. Remove a support of the air chamber.
7. Remove the air chamber and a lining.
8. Disconnect a socket of a plait of wires from fuel atomizers.
9. Remove a fuel highway with fuel atomizers.

The prevention

Be cautious not to drop fuel atomizers at removal of a fuel highway.


10. Remove an insulator from an inlet collector and disconnect a heater hose.
11. Remove an inlet collector.

Check

PERFORMANCE ORDER
1. Check up the air chamber on absence of defects or cracks.
2. Check up an inlet collector on absence of damages or splitting of its any part.
3. Check up an air branch pipe on absence of damages or splitting of its any part.

Installation

PERFORMANCE ORDER
1. Establish a fuel highway with the fuel atomizers fixed on it.

The prevention

Be cautious not to drop fuel atomizers at removal of a fuel highway.


2. Check up that insulators are correctly inserted into apertures of a fuel highway.