Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. A suspension bracket and a steering
   12.1. A technical characteristics
   + 12.2. A rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. The bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. A nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. The back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a self-levelled back suspension bracket
   12.15. Removal and steering wheel installation
   + 12.16. A steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draught
   + 12.19. Steering transfer
   12.20. Removal of air from system of a steering with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation пополнительного a tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. A body
+ 14. Electric schemes


944881c0

12.20. Removal of air from system of a steering with the amplifier
THE GENERAL DATA

The prevention

Removal of air from system is necessary for making after рассоединения hydraulic elements of system.


PERFORMANCE ORDER
1. Uncover a nutritious tank and check up level of a liquid which should be about a label max on probeе for level measurement.
2. Start the engine on turns of idling and check up that liquid level is about a label max on probeе. In the course of removal of air do not suppose a bottom exposure пополнительного a tank.
3. Start the engine on turns of idling and from the centre on 45 ° to the left and to the right some times turn a steering wheel, then turn two times a steering wheel from an emphasis against the stop. Do not leave a steering wheel in extreme position, as in this case loading on hydraulic system of the amplifier of a steering the maximum.
4. Switch off the engine and check up liquid level. If necessary add a liquid.