Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. A suspension bracket and a steering
   12.1. A technical characteristics
   + 12.2. A rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. The bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. A nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. The back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a self-levelled back suspension bracket
   12.15. Removal and steering wheel installation
   + 12.16. A steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draught
   + 12.19. Steering transfer
   12.20. Removal of air from system of a steering with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation пополнительного a tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. A body
+ 14. Electric schemes


944881c0

12.23. Corners of installation of forward wheels
THE GENERAL DATA

Corners of installation of forward wheels

Corners of installation of wheels appreciably influence stability of the car, deterioration of tyres and the fuel expense. Distinguish some corners of installation of wheels.

Disorder is an inclination of a wheel in a vertical plane concerning an average line of the car. It can be positive if wheels are inclined outside, or negative if wheels are inclined inside. The disorder corner, basically, influences uniformity of deterioration of tyres of forward wheels. If disorder of one wheel positive, and another negative the car will withdraw aside at movement on a straight line.

Convergence – lateral distance between wheels. The positive convergence means that wheels are in front located is more close to each other, than behind, at measurement at height of an average point of a wheel. The negative convergence means that wheels in front are on большем distance from each other, than behind.

At the expense of corners of disorder and a cross-section inclination of an axis of turn of a point of a contact of wheels with road settle down more close to an axis of a rotary fist. It supports so-called "a shoulder обкатки". The it is less "a shoulder обкатки", the driving is easier. Also blows from roughness of a covering are less transferred to a steering.

Corner of a longitudinal inclination of an axis of turn. The axis concerning which there is a wheel turn, takes places in space so that its bottom part is inclined forward. Such corner of a longitudinal inclination is called as positive. At positive value of a corner self-return of a wheel to average position after turn improves.

THAT is necessary to make check and adjustment of corners of installation of wheels at station in connection with complexity of the used equipment.

PERFORMANCE ORDER
1. For convergence adjustment ослабьте bolts of clips (on one bolt on spherical hinges of steering draughts and to one bolt on each steering draught) also turn an adjusting pin on each steering draught on identical number of turns and in the same direction (And – bolts of clips, In – an adjusting pin).
2. Turn of pins carry out on 45 ° at one time then check up a convergence.