Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. A suspension bracket and a steering
   12.1. A technical characteristics
   - 12.2. A rack of a forward suspension bracket
      12.2.1. Removal and rack installation
      12.2.2. Repair of a rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. The bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. A nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. The back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a self-levelled back suspension bracket
   12.15. Removal and steering wheel installation
   + 12.16. A steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draught
   + 12.19. Steering transfer
   12.20. Removal of air from system of a steering with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation пополнительного a tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. A body
+ 14. Electric schemes


944881c0

12.2. A rack of a forward suspension bracket

12.2.1. Removal and rack installation

Removal

PERFORMANCE ORDER
1. At presence remove caps of wheels, then ослабьте bolts of fastening of forward wheels.
2. Tighten a manual brake, then lift a forward part of the car and fix on supports.
3. Remove a corresponding forward wheel.
4. Take шплинт and unscrew a nut of fastening of a power shaft to a nave. Remove a nut and a washer.
5. Unscrew bolts and remove from a rotary fist a support of a forward brake. Without disconnecting from a support a brake hose, using a soft wire, tie up a support to a body. Thus do not stretch and do not overwind a brake hose.
6. Unscrew самоконтрящиеся nuts, fastening a pin of the spherical hinge of a tip of steering draught and the bottom lever to a rack of a forward suspension bracket. Using a stripper, take a pin of the spherical hinge from a rack of a forward suspension bracket.
7. Take the external end of a power shaft from a nave of a forward wheel. Using a soft wire, adhere the power shaft end to a body.
8. Unscrew two nuts, fastening the top part of a rack of a forward suspension bracket to a body, and take a rack of a forward suspension bracket with a rotary fist from under a car wing.

Installation

PERFORMANCE ORDER
1. Establish a rack of a forward suspension bracket in the car and screw two самоконтрящиеся nuts of fastening of the top part of a rack, having tightened nuts the demanded moment.
2. Grease шлицы a power shaft and establish a power shaft in a nave of a forward wheel.
3. Establish on a power shaft a washer and screw корончатую a nut, having tightened it at this stage by hand.
4. Insert a pin of the spherical hinge of the bottom lever of a forward suspension bracket into a rotary fist and fix its nut, having tightened its demanded moment.
5. Establish a pin of the spherical hinge of a tip of steering draught in a rack and fix new самоконтрящейся a nut, having tightened its demanded moment.
6. Using a corresponding tap, clear apertures under bolts of fastening of a support.
7. Establish a support and fix its new bolts. Before ввинчиванием bolts put on a carving of bolts the means interfering unscrewing of bolts. Tighten bolts the demanded moment.
8. Tighten the demanded moment a nut of fastening of a power shaft to a nave.
9. Establish a wheel and lower the car.