| 1. Remove a nave. |
| 2. From the interior of a nave remove a sealing ring and take an internal ring of the internal bearing. |
| 3. Fix a nave in a vice with soft sponges and copper выколоткой beat out external rings of bearings from a nave. Thus выколотку establish in regular intervals on a circle in order to avoid a warp of bearings. |
The prevention At выбивании bearings be careful, that did not remain забоины on a bearing seat in a nave.
|
| 4. Clear a nest for the bearing in a nave and, using an emery paper, remove all agnails. |
| 5. Establish new external rings of bearings cones outside. Using tubular оправку the corresponding diameter, запрессуйте rings of bearings in a nave. Thus be careful not to warp a ring as there can be their jamming and destruction. |
| 6. Grease rings of bearings литиевой with greasing and the same greasing fill space between bearings. |
| 7. Establish an internal ring of the internal bearing into place, grease a working edge of a new sealing ring and establish it into place with use tubular оправки the corresponding diameter. |
| 8. Establish a nave and adjust люфт the nave bearing. |
