Opel Kadett E
1984-1991 of release
Repair and car operation
Opel Kadett E
+
1. The maintenance instruction
+
2. Weekly checks and service in a way
+
3. Maintenance service
+
4. The engine
+
5. System of cooling, heating and ventilation
+
6. Fuel and exhaust systems
+
7. Start and gymnastics system
+
8. Ignition system
+
9. Coupling
+
10. Transmissions and power shafts
+
11. Brake system
-
12. A suspension bracket and a steering
12.1. A technical characteristics
+
12.2. A rack of a forward suspension bracket
12.3. Replacement of the bearing of a forward wheel
+
12.4. The bottom lever of a forward suspension bracket
12.5. Removal and installation of the forward stabilizer of cross-section stability
12.6. Adjustment of the bearing of a back wheel
+
12.7. A nave of a back wheel
12.8. Replacement of the back shock-absorber
-
12.9. The back stabilizer of cross-section stability
12.9.1. Removal and installation of the main stabilizer
12.9.2. Removal and installation of the additional stabilizer
12.10. Replacement of back springs
12.11. Removal and installation of a back beam
12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
12.14. Check of system of a self-levelled back suspension bracket
12.15. Removal and steering wheel installation
+
12.16. A steering column
12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
12.18. Removal and installation of tips of steering draught
+
12.19. Steering transfer
12.20. Removal of air from system of a steering with the amplifier
12.21. Removal and installation of the pump of the amplifier of a steering
12.22. Removal and installation
пополнительного a
tank of hydraulic system
12.23. Corners of installation of forward wheels
+
13. A body
+
14. Electric schemes
12.9.2. Removal and installation of the additional stabilizer
MODELS 2,0 OF L WITH 16 TH VALVES
PERFORMANCE ORDER
1.
Lift a back part of the car and fix on supports.
2.
From each party of the stabilizer unscrew on two nuts and take bolts of fastening of the stabilizer.
3.
Installation is made in sequence, return to removal.
