Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
- 16. The electric equipment
   16.1. Specifications
   16.2. Electric chains
   16.3. Gymnastics system
   16.4. Check of an electric chain of gymnastics
   16.5. Power failure check on a wire connecting the storage battery with the generator
   16.6. Check of the current developed by the generator
   16.7. Check of developed pressure
   16.8. The generator
   16.9. The storage battery
   16.10. Check of relative density of electrolit
   16.11. Gymnastics of the storage battery
   16.12. Survey of the storage battery
   16.13. Start system
   16.14. A starter
   16.15. Check and replacement of elements статора
   16.16. The switch of blocking of ignition
   16.17. Check of the relay of a starter
   16.18. Check of the switch of blocking of ignition
   16.19. A radio receiver
   16.20. Dynamics
   16.21. The aerial
   16.22. The multipurpose switch
   16.23. A sound signal
   16.24. Safety locks
   16.25. A combination of devices
   16.26. The engine of a screen wiper of a windscreen
   16.27. Replacement of a headlight and the forward index of turn
   16.28. Adjustment of light of headlights
+ 17. The appendix
+ 18. Electroschemes


944881c0






16.13. Start system The start system includes the storage battery, a starter, the traction relay, the lock of ignition blocking the switch (only on cars with an automatic transmission) and wires.

At starter inclusion through a winding of the traction relay of a starter the current from the storage battery starts to proceed, the relay anchor is involved also relay contacts become isolated. Simultaneously the relay anchor through the lever moves обгонную муфту with a gear wheel. The nave обгонной муфты turns on screw шлицах a starter shaft together with a gear wheel that facilitates its input in gearing with a gear wreath of a flywheel. Through the closed contacts of the traction relay there is a current feeding windings статора both anchors, and the starter anchor starts to rotate together with a nave and обгонной муфтой.

After the engine starts to work, frequency of rotation of a gear wheel exceeds frequency of rotation of an anchor of a starter, обгонная муфта the twisting moment is freely turned also not transferred from a flywheel to a starter shaft. After отпускания the ignition key the feed circuit of a winding of the traction relay is disconnected, the anchor of the traction relay is wrung out by a spring in a starting position, relay contacts are disconnected also a drive gear wheel leaves gearing with a gear wreath of a flywheel.