Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
- 16. The electric equipment
   16.1. Specifications
   16.2. Electric chains
   16.3. Gymnastics system
   16.4. Check of an electric chain of gymnastics
   16.5. Power failure check on a wire connecting the storage battery with the generator
   16.6. Check of the current developed by the generator
   16.7. Check of developed pressure
   16.8. The generator
   16.9. The storage battery
   16.10. Check of relative density of electrolit
   16.11. Gymnastics of the storage battery
   16.12. Survey of the storage battery
   16.13. Start system
   16.14. A starter
   16.15. Check and replacement of elements статора
   16.16. The switch of blocking of ignition
   16.17. Check of the relay of a starter
   16.18. Check of the switch of blocking of ignition
   16.19. A radio receiver
   16.20. Dynamics
   16.21. The aerial
   16.22. The multipurpose switch
   16.23. A sound signal
   16.24. Safety locks
   16.25. A combination of devices
   16.26. The engine of a screen wiper of a windscreen
   16.27. Replacement of a headlight and the forward index of turn
   16.28. Adjustment of light of headlights
+ 17. The appendix
+ 18. Electroschemes


944881c0






16.26. The engine of a screen wiper of a windscreen Removal and installation

PERFORMANCE ORDER
1. Turn away a nut and remove levers of screen wipers.
2. Uncover, located under a windscreen.
3. Remove the screen wiper engine.
4. Turn out bolts and remove the screen wiper mechanism.
5. Installation is spent to sequences, return to removal.

Check of frequency of work of a screen wiper


PERFORMANCE ORDER
1. Disconnect a socket from the screen wiper engine.
2. Additional wires connect the positive plug of the storage battery to contact 6 sockets, and the negative plug – to contact 3.
3. Be convinced that the screen wiper engine works on low frequency of rotation.
4. Additional wires connect the positive plug of the storage battery to contact 6 sockets, and the negative plug – to contact 2.
5. Be convinced that the screen wiper engine works on high frequency of rotation.

Check of an automatic stop of brushes in an initial condition


PERFORMANCE ORDER
1. Include the engine on low frequency of rotation.
2. Having disconnected a wire from contact 3 sockets, stop the engine in any position, except the initial.
3. Connect contacts 3 and 5 sockets.
4. Additional wires connect the positive plug of the storage battery to contact 6 sockets, and the negative plug – to contact 1.
5. Check up that the screen wiper engine is switched off in a starting position of brushes of a screen wiper.