Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
- 16. The electric equipment
   16.1. Specifications
   16.2. Electric chains
   16.3. Gymnastics system
   16.4. Check of an electric chain of gymnastics
   16.5. Power failure check on a wire connecting the storage battery with the generator
   16.6. Check of the current developed by the generator
   16.7. Check of developed pressure
   16.8. The generator
   16.9. The storage battery
   16.10. Check of relative density of electrolit
   16.11. Gymnastics of the storage battery
   16.12. Survey of the storage battery
   16.13. Start system
   16.14. A starter
   16.15. Check and replacement of elements статора
   16.16. The switch of blocking of ignition
   16.17. Check of the relay of a starter
   16.18. Check of the switch of blocking of ignition
   16.19. A radio receiver
   16.20. Dynamics
   16.21. The aerial
   16.22. The multipurpose switch
   16.23. A sound signal
   16.24. Safety locks
   16.25. A combination of devices
   16.26. The engine of a screen wiper of a windscreen
   16.27. Replacement of a headlight and the forward index of turn
   16.28. Adjustment of light of headlights
+ 17. The appendix
+ 18. Electroschemes








16.4. Check of an electric chain of gymnastics
PERFORMANCE ORDER
1. Include ignition.
2. After ignition inclusion at the working engine the control lamp of gymnastics of the storage battery should burn.
3. Disconnect a socket from the resistor of preliminary excitation of the generator.
Connect an ohmmeter to contacts 1 and 3 sockets from outside components. Positive щуп (+) an ohmmeter connect to contact 3, and negative щуп (–) – to contact 1.

The prevention

If an ohmmeter to connect incorrectly, it will not show value of resistance



Result


PERFORMANCE ORDER
1. If there is a conductivity shown by an ohmmeter, means, the electric chain is perfectly in order. If conductivity is absent, means, the electric chain is faulty.
2. If conductivity is absent only on a step 3, check up and restore an electric chain of a control lamp. If conductivity is absent only on a step 2, check up the resistor of preliminary excitation of the generator.

The prevention

If conductivity is absent only on one of steps 2 and 3, means, the system works normally, however, for more reliable work of system it is necessary to inspect an electric chain.