Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. The maintenance instruction
- 2. The engine
   - 2.1. Engines SOHC
      2.1.1. Specifications
      2.1.2. A gear belt
      2.1.3. Check of a tension of a gear belt
      2.1.4. Adjustment of a tension of a gear belt
      2.1.5. A poliklinovoj belt
      2.1.6. Engine support
      2.1.7. A forward cover and the oil pump
      2.1.8. The air filter (ACL)
      2.1.9. A head of cylinders
      2.1.10. Коромысла
      2.1.11. Hydraulic jacks of backlashes of valves
      2.1.12. Replacement of a saddle of the valve
      2.1.13. Replacement of the directing plug of the valve
      2.1.14. The valve
      2.1.15. A camshaft
      2.1.16. Rods
      2.1.17. A cranked shaft
      2.1.18. A flywheel
      2.1.19. A piston finger
      2.1.20. A final collector
      2.1.21. An inlet collector and the air chamber
      2.1.22. The block of cylinders
      2.1.23. Removal and engine and transmission installation
      2.1.24. System of release of the fulfilled gases
      2.1.25. Search and elimination of malfunctions
   + 2.2. Engines DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes

944881c0





2.1.24. System of release of the fulfilled gases
1 – a bolt, 30–40 Н•м;
2 – a lining;
3 – каталитический neutralizer;
4 – the central muffler;
5 – the main muffler;
6 – a suspension bracket; 		7 – a nut, 30–40 Н•м;
8 – a bolt, 40–60 Н•м;
9 – a reception exhaust pipe;
10 – the oxygen gauge;
11 – каталитический neutralizer.

Removal

The main muffler
The prevention

Before removal or survey of elements of system of release of the fulfilled gases be convinced that it has enough cooled down.

PERFORMANCE ORDER
1. Disconnect the muffler from the central pipe.
2. Remove rubber suspension brackets and remove the main muffler from the car.

The central pipe

PERFORMANCE ORDER
1. Separate the central muffler from a reception exhaust pipe.
2. Remove rubber suspension brackets and remove the central muffler from the car.

Katalitichesky neutralizer

PERFORMANCE ORDER
1. Remove каталитический neutralizer from a reception exhaust pipe.
2. Remove каталитический neutralizer from a head of the block of cylinders.

Reception exhaust pipe

PERFORMANCE ORDER
1. Disconnect a socket from the oxygen gauge.
2. Separate a reception exhaust pipe from каталитического neutralizer or a final collector.
3. Turn out forward tightening a bolt of an exhaust pipe and a nut of fastening of the central muffler.

Check

PERFORMANCE ORDER
1. Check up mufflers and pipes on absence of corrosion and damages.
2. Check up rubber suspension brackets on absence of ageing and cracks.

Installation

PERFORMANCE ORDER
1. Temporarily establish assemblage каталитического neutralizer, a reception exhaust pipe, the central and back mufflers.
2. Reliably tighten all connections of elements of system of release of the fulfilled gases. Moving to the parties a car exhaust system, check up, that it did not concern car bodies. Otherwise replace rubber suspension brackets of an exhaust system.