Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
- 2. The engine
   - 2.1. Engines SOHC
      2.1.1. Specifications
      2.1.2. A gear belt
      2.1.3. Check of a tension of a gear belt
      2.1.4. Adjustment of a tension of a gear belt
      2.1.5. A poliklinovoj belt
      2.1.6. Engine support
      2.1.7. A forward cover and the oil pump
      2.1.8. The air filter (ACL)
      2.1.9. A head of cylinders
      2.1.10. Коромысла
      2.1.11. Hydraulic jacks of backlashes of valves
      2.1.12. Replacement of a saddle of the valve
      2.1.13. Replacement of the directing plug of the valve
      2.1.14. The valve
      2.1.15. A camshaft
      2.1.16. Rods
      2.1.17. A cranked shaft
      2.1.18. A flywheel
      2.1.19. A piston finger
      2.1.20. A final collector
      2.1.21. An inlet collector and the air chamber
      2.1.22. The block of cylinders
      2.1.23. Removal and engine and transmission installation
      2.1.24. System of release of the fulfilled gases
      2.1.25. Search and elimination of malfunctions
   + 2.2. Engines DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






2.1.6. Engine support

Removal

PERFORMANCE ORDER
1. Fix captures of the load-lifting mechanism for eyes of the engine and lift so that the engine weight was perceived by the load-lifting mechanism.
2. Turn out bolts of fastening of a support of the engine.
3. Remove a support of the engine from the engine.
4. On cars with a mechanical transmission remove the gear change lever.
5. Turn out a bolt of fastening of a transmission.
6. Remove protection of an arch of the right wheel. Turn out bolts of fastening of an arm of a transmission.
7. Remove a transmission arm.
8. Turn out the top and bottom bolts of fastening of a forward support of the engine.
9. Remove a forward support of the engine.
10. Turn out a bolt of fastening of a back support of the engine.
11. Remove a back support of the engine from the bottom frame.