1. Remove steering transfer. |
2. Remove a clip and a rubber element from the left end face of steering transfer. |
3. On steering transfer with the amplifier of a steering from the left end of steering transfer disconnect hydraulic tubes. |
4. From two parties of steering transfer remove external clamps of a protective cover, then remove knot of a protective casing / of a pipe. |
5. Remove internal clamps of a protective casing and remove a protective casing from a pipe. |
6. Establish a new protective casing on a pipe and fix new clamps. Clamps should be placed so that after installation of steering transfer on the car the ends of clamps have been directed upwards. |
7. Establish knot of a protective casing / of a pipe on steering transfer and fix its external ends the new clamps which ends should be directed upwards. |
8. On models with the steering amplifier connect hydraulic tubes with new sealing rings. |
9. Establish a clip and a rubber element and establish steering transfer on the car. |