Пристегивание a seat belt To fasten a seat belt, extend it from the involving mechanism and insert a belt lath (a latch uvula) into the lock before click.
|
Zastegivanie buckles of a seat belt | The seat belt automatically chooses the demanded length only after you manually will adjust a zone belt so that it densely fitted your hips. After putting on of such belt it automatically follows slow movements of your body, but in case of sudden or strong jerk the belt is automatically blocked for deduction of the fastened person. The belt also will be blocked, if you sharply pull it forward. Check reliability of fastening of the lock of a seat belt and that the seat belt has not been overwound. Seat belt adjustment
Never put on a zone seat belt across a belly cavity. In case of failure the belt can sharply run into a stomach and increase risk of reception of a trauma. When the belt is located too highly danger of raises that you will slip out from under a belt in case of road and transport incident or at sharp braking. It can lead to car damage, serious traumas or destruction. Both hands should not be simultaneously under or over a belt. One hand should be under, and another over a belt, as is shown in drawing. Never pass a humeral belt near at hand which is more close to a door.
|
Arrangement бедерной seat belt parts | Отстегивание a seat belt For отстегивания a seat belt undertake a lath (a latch uvula) and press the button on the belt lock. When a belt will unfasten, it is automatically cleaned by the involving mechanism.
If it does not occur, check up a belt on absence перекручивания and repeat attempt again.
| Отстёгивание a forward seat belt |
|