Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. A central air
   15.1. Specifications
   15.2. The instruction on coolant application
   15.3. Remarks at replacement of elements of a central air of air
   15.4. Connection of elements of a central air of air
   15.5. Check of elements of the central air established on the car
   15.6. Installation of manometres for pressure measurement
   15.7. Откачка atmospheric air from a central air
   15.8. Gymnastics of a central air of air
   15.9. Check of level of a coolant
   15.10. Check of operational characteristics
   15.11. Oil for greasing of the compressor of the conditioner
   15.12. Relay check
   15.13. The conditioner compressor
   15.14. The plug of coupling and a pulley of the compressor of the conditioner
   15.15. The coil of excitation of coupling
   15.16. Compressor check on the car
   15.17. The gauge of threefold (double) pressure
   15.18. The fan and the condenser
   15.19. The evaporator
   15.20. Check of the thermostatic gauge (термистора)
   15.21. The air filter of the evaporator
   15.22. The heating and ventilation block
   15.23. The heater block
   15.24. The fan
   15.25. Search and elimination of malfunctions
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






15.12. Relay check
PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Uncover the block of the relay located in a motor compartment.
3. Remove the relay from the relay block.
4. Check up conductivity between relay contacts.

Check of the relay of a central air of air



If conductivity differs from demanded, replace the relay.

Check of the relay of the fan of the condenser



If conductivity differs from demanded, replace the relay.

The relay of the fan of a heater


PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Disconnect a socket from the switch of the fan of a heater.
3. Remove the relay and check up conductivity between relay contacts.
If conductivity differs from demanded, replace the relay.