Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. A central air
   15.1. Specifications
   15.2. The instruction on coolant application
   15.3. Remarks at replacement of elements of a central air of air
   15.4. Connection of elements of a central air of air
   15.5. Check of elements of the central air established on the car
   15.6. Installation of manometres for pressure measurement
   15.7. Откачка atmospheric air from a central air
   15.8. Gymnastics of a central air of air
   15.9. Check of level of a coolant
   15.10. Check of operational characteristics
   15.11. Oil for greasing of the compressor of the conditioner
   15.12. Relay check
   15.13. The conditioner compressor
   15.14. The plug of coupling and a pulley of the compressor of the conditioner
   15.15. The coil of excitation of coupling
   15.16. Compressor check on the car
   15.17. The gauge of threefold (double) pressure
   15.18. The fan and the condenser
   15.19. The evaporator
   15.20. Check of the thermostatic gauge (термистора)
   15.21. The air filter of the evaporator
   15.22. The heating and ventilation block
   15.23. The heater block
   15.24. The fan
   15.25. Search and elimination of malfunctions
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






15.23. The heater block
1 – a cover of a radiator of a heater;
2 – a heater radiator;
3 – заслонка air mixing;
4 – a clip;
5 – the heater case;
6 – a lining;
7 – заслонка managements;
8 – the heater case.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge cooling liquid.
3. Disconnect from a radiator of a heater hoses of giving and return of a cooling liquid.
4. Discharge air central air.
5. Disconnect soaking up tube and a tube for a liquid coolant from the evaporator.
6. Remove a steering wheel and the multipurpose switch.
7. Remove the forward and back console.
8. Remove the bottom decorative panel on the left side of the panel of devices.
9. Remove the panel of the block of management of heating and ventilation.
10. Remove the block of management of heating and ventilation.
11. Remove a ware box.
12. Turn out 4 bolts and remove a pillow of safety of the forward passenger.
13. Disconnect a cable from the block of heating and a socket from the thermostatic switch on the evaporator block.
14. Remove the panel of devices.
15. Turn out nuts of fastening of the evaporator.
16. Remove the evaporator block.
17. Turn out nuts of fastening of a cross-beam and remove it.
18. Turn out 3 bolts of fastening of a heater.
19. Remove the heater block.

Installation

PERFORMANCE ORDER
1. Installation is spent to sequences, return to removal.
2. After installation of the block of a heater check up smoothness of moving and work заслонок.